Opening a Rainfall Mass Balance template

FlowWorks' Rainfall Mass Balance tool is used for comparing rainfall sites to the cumulative average of related rainfall sites.

Rainfall Mass Balance settings can be saved as a "template". With templates, you can re-run a rainfall mass balance query without having to re-configure the settings.

This article describes how to use a saved template.

1. Open the Rainfall Mass Balance tool

  1. Hover over Analysis. A drop-down menu appears.
  2. Click Rainfall Mass Balance.

2. Load a template

Under the Load From Template section, use the drop-down menu to choose a template.

3. Click Plot Graph


Article is closed for comments.